Vacuum Pump Built In LCD screen separator machine / Automatic split screen phone touch equipment with heating function

Promotion Price $100 !  Vacuum Pump Built In LCD screen separator machine / Automatic split screen phone touch equipment with heating function

This touch screen separator is used for:
Apple Iphone4 / 5 Samsung and other mobile phone HTC Touch split or separate glass cover sheet with the touch screen function between the screen and the screen between the company and other separators compared to the following characteristics:
1. Simple structure, easy to operate, easy to learn, and small size. Vacuum suction, suction strength greater independence. Avoid off-screen phenomenon.
2. Split the high yield, general electric separator is no way to divide broken glass cover, and our broken no matter how serious the separator assembly can be well separated.
3. The price is cheap, compared to less than half the price of our peers and other separators separate machines. More suitable for small businesses.
4. caring service, we not only sell products, but to sell services
5. Product compatibility. Precise temperature control, will not burn the screen!

Temperature adjustment: 80-100 ℃
    SET ---- enter adjustment
   > ---- Mobile
   ▲ ---- raised
   ▼ ---- down
Instructions:

:( Temperature adjustment is recommended practice three times a bad apple screen separation (100 degrees) is set to 100 degrees, warming up, press the screen up, I would go hand pressure pressure screen can feel hot isolated (--- in addition to plastic - on glue - curing) repeated three times, and then do a good screen.

1. Split

1. The key point on the screen (on fast fast down) principles. 2. Cut the wire to do the bottom shelf, below the level of the screen - do not worry when the drop-down, slowly about (magnitude) to a large, pull down until separation (one not) can return the knife two or three times, until you feel separation, so that lift lines. Video is to see action not see these key points: Do not worry when the drop-down is going to rely on the cylindrical steel wire wire near the drop-down slider, radian not large, about to pull to a large extent.

2, in addition to plastic

Supporting glue solution is specially dedicated, after the separation of sticky glue solution slowly with a clean cloth to wipe clean.

3, the uv glue that plastic water. [Oca practices need glue dry glue laminating machine bubble machine can, specific Advisory Service]

Due to the impact on the plastic screen the finished effect, so to practice more, the amount of words can not be said clearly. As long as they go full screen on the line. Skills, (to prevent frothy, put the glass when we must slow, watching glue, do not let him have a bubble, do not put away the hand pressure and let it slowly sink Wait glue themselves to go over the entire screen.)
4, curing

The key point of the curing process: the good of the screen according to the curing lamp for 1-2 minutes, then come up (this process is called pre-cured), the clean side of the glue, then put light curing, curing 8- general 15 minutes.

Explosion screen repair Scope:
1, Apple Samsung HTC Huawei, ZTE Lenovo-made Cool and all other mobile phones, as long as you can find cover, can be separated from fit-for-glass cover.
2, glass mirror broken but can be displayed properly cover normal touch points, for the cover, this approach lowest cost, also tens of dollars.
3, can be displayed properly, but the touch is not working, for the touch-screen tablet or touch screen functionality.
4, for the LCD screen, touch screen intact but does not display or change the monitor break the LCD screen can also be isolated.
Explosion entire screen during maintenance equipment and supplies needed for the following:
A separate machine, used to split broken glass mirror. (Price, please contact us)
2, the cutting line, for cutting broken mirror.
3, except after the glue used to remove the glass cover on top of the cleaning adhesive residue.
[502 glue, mainly used for coating on broken glass cover, broken glass fixed to play a role in preventing the separation of broken glass scratch feature film.
Waste glass cover, the more serious rupture with 502 glue stick used cover fixed broken glass surface, easy to use jigs. Can be reused. ] Vacuum suction, now do not need 502 fixed.
4, UV glue for bonding separated touchscreen functionality with the new glass cover sheet.
5, fit curing mold positioning, each model requires a mold. A special curing light.
6, the new glass cover, including HTC, Samsung and other markets Apple has provided a large number of sources, there is also the original assembly.
A sub-hundredfold return on investment, and so what! Time is money, and so one day you will lose all money for a whole set of machine . 

Best Regards,  

Mishell Hu

http://xiyo.en.alibaba.com/

Email: sales.mishell@gmail.com     sales003.szxiyo@gmail.com 

TM: cn1511814035

Mobile / Whatsapp : +86 13544235697

Facebook : https://www.facebook.com/mobilerepairing.mishell