wholesaler of Mobile repairing machines--Mishell of Xiyo Co.,: November 2014

Sunday, November 30, 2014

wholesaler of Mobile repairing machines,mobile refurbished tools,mobile parts --Shenzhen Xiyo Co.,: iPhone 6/6 Plus dismantling comparison: inside are...

wholesaler of Mobile repairing machines,mobile refurbished tools,mobile parts --Shenzhen Xiyo Co.,: iPhone 6/6 Plus dismantling comparison: inside are...: iPhone 6/6 Plus dismantling comparison: inside are quite different Foreign technology media CNET did a Internal Dismantling on iPhone ...

iPhone 6/6 Plus dismantling comparison: inside are quite different

iPhone 6/6 Plus dismantling comparison: inside are quite different

Foreign technology media CNET did a Internal Dismantling on iPhone 6 and iPhone 6 Plus mobile phone recently , Dismantling comparison found via OCA vacuum laminating machine , Although the hardware of iPhone 6 and iPhone 6 Plus are convergence, and looks only the sizes are different from the exterior shape, in fact, the existence of the internal structure are subtle differences, mainly in the following six points :

First, the optimization of the Home key cable distribution

The User who Disassembled iPhone 5s 5s before must know that the cable of HOME key Touch ID fingerprint recognition is very easy to be snapped , this is depending on the strength of those who uncover disassemble the screen . The dismantling way for The iPhone 6/6 Plus are apparently approach, but this makes most of the users who tried to disassemble this phone forget the cable which is very easily to be snapped .which means dismantling iPhone 6/6 Plus is actually much simpler than before.

O CA vacuum laminating machine

Second, the basic structure of two phones are similar

iPhone 6 Plus internal hardware and iPhone 6 have same layout. Set the bottom of the speaker, Lightning interface, the phone battery is located on the left side, the right side of the phone motherboard, camera located at the top position, with the front panel is affixed together display, front camera and sensor, ear speaker and Home button. Further, after the display and a new metal plate.

Three different system board (oca vacuum laminating machine)

iPhone 6 Plus phone system board is not only different from the previous generations of iPhone, there are differences between the system board with the iPhone 6. But two motherboard has a similarity is that most of the chip inside the phone to protect the metal protective plate is firmly fixed, you can not see the inside of the structure. So if you want to see the inside of the chip, metal fenders must be "demolitions" Fortunately, the protective metal plate is fixed by screws on the phone, so do not worry about a bad split.

Four different vibration module

iPhone 6 Plus and the iPhone on a different vibration module 6 and is located in a different location. iPhone vibration module 6 of the lower right corner of the phone, while 6 Plus module position on the left, a higher position than the iPhone 6.

Five different internal speaker

Both phones have different external speakers, are located in the bottom right of the phone though, but compared to the iPhone speaker 6, Plus speaker slightly larger in size.

Six batteries of different sizes

iPhone 6 Plus uses a 11.1Wh (2950mAh) battery, much larger than the iPhone 6 in 6.91Wh (1850mAh) battery. From the size of the battery is also not difficult to see, 6 Plus battery size than six out nearly doubled battery iPhone 6 and accounted for almost 60% of the space fuselage Plus, this is enough to see the battery technology stagnation under the status quo is not in front of, to get an iPhone twice as long standby time, in addition to increasing the battery capacity, no other way.

oca vacuum laminating machine

For more Details , pls contact

Mishell via Whatsapp : 8613544235697 ,

When contact me , pls inform me that you get my info via Google , then I will offer you better discount price .

My email : sales003.szxiyo@gmail.com . sales.mishell@outlook.com .

Facebook : https://www.facebook.com/mobilerepairing.mishell

Thursday, November 27, 2014

Remarks when using OCA Vacuum Laminating Machine in our daily life

Laminating machine ( Full Auto price $2390 / set , If need Semi Auto Laminator ,then price $1650 , Welcome for your feedback with comments or question ) is a kind of device can suppress all metal scrap into a flat, easy to waste recycling metal waste transport and placement. So to say, this machine is usually for everyone to never use, there is no relationship between the machine. In fact, when you use metal products, while also continuing to discard useless metal products, they are a renewable resource, can be recycled and reused. We need someone to recycle waste, the need to recover the machine. Laminating machine equipment is to play a catalytic role in recycling, the stresses comprehensive weighed into a scrap metal block.
Proper use of equipment laminating machine, earnestly implement the maintenance system, strict compliance with safety rules is to extend machine life, increase productivity and ensure the necessary conditions for safe production. For this reason, it is recommended to establish system maintenance and safety procedures, the operator should be familiar with the machine in addition to the structure and operating procedures, but also need to pay attention to the following points:
1, pump, valve, pressure gauge adjustment must be performed by an experienced technical workers, if found faulty pressure gauge should be checked immediately repaired or replaced with new tables.
2, the tank should be cleaned every six months and replace it with new oil once, but first cleaning the oil filter can not exceed one month, used once a new oil filter after rigorous allowed once again.
3, the user should be based on the specific circumstances, automatically develop a detailed maintenance and safety procedures.
4. Add the oil tank must be rigorously filtered, and should always keep enough oil, the oil should be less than filling immediately, to avoid pump cavitation noise.
5, without learning, do not understand the machine structure, performance and operating procedures are not allowed to use the machine.
6, a day after work should clean up the debris and keep the material inside the device neat appearance, should be required to place the machine lubrication lubrication.
7, when there was a serious oil spill or the occurrence of anomalies in the work, should be immediately stopped, analyze the reasons for troubleshooting, operation can not be forcibly sick.
8, the machine during operation or lamination process, may not be repaired, not touch the moving parts, is prohibited by hand or foot in the feed box pressed materials.

For More Details , pls contact mishell at sales.mishell@outlook or sales.mishell@gmail.com,. or Via Whatsapp : 8613544235697
Facebook : https://www.facebook.com/mobilerepairing.mishell

Hope can hear from you soon .

Wednesday, November 26, 2014

Triplex Performances of Vacuum Laminating Machine

factory direct Price! Shenzhen mini automatic OCA vacuum laminating machine

Our company is mainly Design, production and sales of businesses, products with small size, light weight, stable quality and cheaper prices and other characteristics, especially for the communications market and individual mobile phone repair shop use. Company products include, separation equipment, in addition to dispensing equipment, laminating equipment and glass cover, such as supplies, equipment and supplies to provide customers with one-stop shopping to customers save a lot of time, the company is adhering to the "explosion screen repair, we are more professional," the philosophy has always adhere to the "quality first, customer first" purpose, and domestic and foreign customers and common development, and create a win-win.
The sale of the company's main products include: OCA vacuum laminating machine, in addition to bubble machine, LCD separator, clean table, OCA laminating machine, bracket /frame laminating machine, dispenser. Products with small size, good quality, low prices, especially for the self-employed to use. To enhance the quality of service, all for the sake of customers, the company provide customers with one-stop procurement of equipment and supplies to customers save a lot of time.

Our Company now improved the Vacuum Laminating machine to be with triplex laminator , this makes customer laminating the film more stable and more flat . make them Laminating better!

Contact Mishell at : sales.mishell@gmail.com

and Whatsapp : 8613544235697

Facebook : https://www.facebook.com/mobilerepairing.mishell

for more details .

Thanks

Iphone6 Full Laminating . Detailes : Introduce how Iphone6 full OCA laminating will be

As smartphones becoming more and more popular, market competition are being intensifying, many handset makers are hoping that some differentiation to highlight their product characteristics.Apple, for example, the early launch of the retina screen, touch screen laminating machine one of the first screen and Clear Black screen technology, and so on.The neologisms appear constantly, let the market more competitive, at the same time also let many consumer overwhelmed, sometimes we haven't understand new technology at the same time, another kind of new technology was born."Whole" fit screen can say is each big mobile phone manufacturer of topic in nearly a year, one of the "joint" technology has what characteristics, for users, and can bring what experience, I believe you are also very attention, therefore, let us to know the whole joint screen technology together.
Touch screen laminating machine

Oca laminating machine
First of all, we first to get to know the structure of the screen, the composition of screen can be divided into roughly three parts, respectively, to protect the glass, touch screen and display.The three parts is need to undertake joint, usually requires two joint, between the protective glass and touch screen is a joint, and another joint is between the screen and touch screen.According to the way of joint can be divided into the joint and put two boxes.
Box stick glue joint is also called mouth words, namely simple to secure around the screen and display with double-sided adhesive, which is at present most of the display screen is adopted by the joint mode, its advantage lies in the simple process and low cost, but because the display screen and the touch screen, there is air layer between the light refraction cause show effect after discounted become box posted the biggest drawback.
And the whole plastic or optical plastic laminating technology is that water panel and touch screen in the form of seamless completely stick together.Compared with box stick, can provide a better display effect.

All joint technology of another advantage is that the screen no longer into ashes.Touch module also because of closely integrated with the panel to strength improved, in addition, the joint screen than the traditional screen also has more characteristics of the ultra-thin.